BRUSHING SYSTEM
BRUSH/PAD CLEANING
CAUTION!
It is advisable to wear protective gloves when cleaning the brushes/pads because there may be sharp debris.
1.
Remove the brushes/pads, as shown in the User Manual.
2.
Clean and wash the brushes/pads with water and detergent.
3.
Check that the brush/pads are integral and not excessively worn; otherwise replace them.
4.
(For Adfinity™ X20C) Remove the debris container (A) by pulling it on one side with the handle (B). Empty and wash the
debris container (A), and then install it by engaging it on the inside fasteners.
Adfinity™ 17ST / 20ST / X20R / 20D / X20D / X20C / X24D
A
SERVICE MANUAL
BRUSHING SYSTEM
B
9096982000
ENGLISH
S301529A
33