OTHER SYSTEM
SCREW AND NUT TIGHTENING CHECK
1.
Drive the machine to the appointed disposal area, and empty the recovery water tank (21) with the hose (16).
2.
Place the machine on a hoisting system (if available).
Otherwise, drive the machine on a level floor.
(For Adfinity™ X20R, 20D, X20D, X20C, X24D) Turn the ignition key (80) to "0".
3.
•
•
(For Adfinity™ 17ST, 20ST) Turn off the switches (71) and (73).
4.
Grasp the handle (41) and carefully lift the tank (40).
5.
Check:
•
Tightening of mounting screws and nuts;
•
Correct position of fasteners;
•
Visible faults in the components;
•
Leaks of fluids.
6.
Carefully lower the tank (40).
7.
Remove the machine from the hoisting system.
Adfinity™ 17ST / 20ST / X20R / 20D / X20D / X20C / X24D
SERVICE MANUAL
OTHER SYSTEM
9096982000
ENGLISH
75