Vacuum System Motor Disassembly/Assembly - Advance acoustic Adfinity 17ST Service Manual

VACUUM SYSTEM MOTOR DISASSEMBLY/ASSEMBLY

Disassembly
1. If the tank (21) contains recovery water:
• Drive the machine to the appointed recovery water disposal area.
• (For Adfinity™ X20R, 20D, X20D, X20C, X24D) Turn the ignition key (80) to "0".
• (For Adfinity™ 17ST, 20ST) Turn off the switches (71) and (73).
• Empty the recovery water tank (21) with the hose (16).
2. Drive the machine on a level floor.
3. • (For Adfinity™ X20R, 20D, X20D, X20C, X24D) Turn the ignition key (80) to "0".
• (For Adfinity™ 17ST, 20ST) Turn off the switches (71) and (73).
4. Disconnect the battery connector (12).
5. Grasp the handle (41) and carefully lift the tank (40).
6. Remove the screws (A) and recover the washers.
7. Remove the motor cover (B).
8. Remove the filter (C) and the gasket (D).
9. Remove the motor (E), the sound-deadening pipe (F) and the sound-deadening panel (G).
10. Disconnect the electrical connector (H) of the motor (E).
11. Check the efficiency of the gasket (I) and, if necessary, replace it.
Assembly
12. Assemble the components in the reverse order of disassembly, and note the following:
• If necessary, clean the filter (C) before assembling it (see the procedure in the relevant paragraph).
G
F
A
Adfinity™ 17ST / 20ST / X20R / 20D / X20D / X20C / X24D
SERVICE MANUAL
RECOVERY WATER SYSTEM
I
E
H
D
C
B
A
ENGLISH
65
9096982000
S301556A