Brush Motor Disassembly/Assembly (For Adfinity™ X20C) - Advance acoustic Adfinity 17ST Service Manual

BRUSH MOTOR DISASSEMBLY/ASSEMBLY (For Adfinity™ X20C)
Disassembly
1. Remove the cylindrical brush deck (see the procedure in the relevant paragraph).
2. At the workbench, remove the screw (A) from the motor which has to be disassembled.
3. Remove the case (B).
4. Loosen the nut (C) and move the pulley (D) to loosen the belt (E).
5. Remove the belt (E).
6. Remove the screws (F).
7. Remove the motor (G).
Assembly
8. Assemble the components in the reverse order of disassembly, and note the following:
• The electrical connections (H) of the motor (G) must be turned upwards.
• The connection (J) of the carbon brush protection clamps (I) must be positioned as shown in the figure.
• Install the belt (E) and tension it properly (see the procedure in the relevant paragraph).
C
Adfinity™ 17ST / 20ST / X20R / 20D / X20D / X20C / X24D
B
A
D
SERVICE MANUAL
I
J
G
H
D E
ENGLISH
BRUSHING SYSTEM
J
I
H
F
55
9096982000
S301545A