ENGLISH
SERVICE MANUAL
BRUSHING SYSTEM
BRUSH MOTOR CARBON BRUSH CHECK/REPLACEMENT (For Adfinity™ X20D)
1.
Remove the deck (see the procedure in the relevant paragraph).
2.
Set the scrub deck on a workbench,
NOTE
The brush motor does not need to be removed from deck assembly.
3.
Remove wire retaining nut and rubber packing.
4.
Remove both through bolts.
48
9096982000
Adfinity™ 17ST / 20ST / X20R / 20D / X20D / X20C / X24D