Selecting Button Beep; Selecting Remote Start Melodies; Demo Mode; Selecting Melody & Vibrate Modes - Excalibur AL-2060-EDPB Operation Manual

SELECTING BUTTON BEEP

SELECTING REMOTE START MELODIES

DEMO MODE

Demo mode will show you a demonstration movie of all the controller's confi rma-
tion animations and alerts� To view demo mode, use the following steps�
1) Press the "P" button for 3 seconds to access options�
2) Scroll down until "DEMO" is highlighted
3) Press the  button to select�
SELECTING MELODY & VIBRATE MODES
Whenever 2-way alerts are received from the system, the controller can alert you
with a melody, vibration, or both� By default, the controller is set for melody only�
Press the "P" and trunk buttons simultaneously for 2 seconds to scroll through
each setting. The sequence is VIBRATE only, MELODY & VIBRATE, MELODY only�
The melody and vibrate icons at the top of the status screen will change to indicate
your selection�
PARKING TIMER & REMOTE START TIMER
The controller has 2 convenient timer functions� The PARKING TIMER tells you
how long you've been parked in case you are at a parking meter or other parking
areas with time restrictions� The REMOTE START TIMER tells you how long your
engine has been running in remote start mode�
PARKING TIMER: Press LOCK twice within 5 seconds� When the controller receives
both LOCK confi rmations, it will start the timer.
REMOTE START TIMER: This turns on every time you remote start�
Note: Pressing the "P" during either timer mode will switch between the timer
and clock.
Programming Controller Options (cont'd)
With this option turned ON, the controller will beep to con-
fi rm each button press. The default setting is OFF. To turn
ON/OFF, use the following procedure:
1) Press the "P" button for 3 seconds to access options�
2) Scroll down until "Button Beep" is highlighted
3) Press the  button to select�
4) Scroll up or down to highlight the desired setting�
5) Press the  button to select�
This option allows you to select from 5 different melodies to
indicate when remote start is turned on and off� To change
the setting, use the following procedure:
1) Press the "P" button for 3 seconds to access options�
2) Scroll down until "Melodies" is highlighted
3) Press the  button to select�
4) Scroll up or down to highlight the desired setting�
5) Press the  button to select�
17