Setting The Clock; Power Save Mode; Screen Lighting - Excalibur AL-2060-EDPB Operation Manual

Programming Controller Options (cont'd)

SETTING THE CLOCK

9) The minute digits will now be highlighted� Scroll to the desired minute setting�
10) Press the  button to select�
END HERE IF CLOCK IS IN 24 HOUR FORMAT
11) AM/PM will now be highlighted� Scroll to select the desired setting�
12) Press the  button to select�

POWER SAVE MODE

SCREEN LIGHTING

16
1) Press the "P" button to access the options menu�
2) Scroll down until "Set Clock" is highlighted
3) Press the  button to select�
4) Scroll to highlight either 12 (AM/PM) or 24 hour format�
5) Press the  button to select� (the hour is highlighted)
6) Scroll to select the desired hour�
7) Press the  button to select� (the hour is highlighted)
6) The hour digits will now be highlighted� Scroll to select
the desired hour�
8) Press the  button to select�
The 2-way portion of the controller can be disabled com-
pletely to save battery life while traveling or out of range of
the vehicle� To set power save:
1) Press the "P" button to access the options menu�
2) Scroll down until "Power Save" is highlighted
3) Press the  button to select�
4) Scroll to select ON or OFF, whichever is desired�
3) Press the  button to select�
When Power Save mode is ON, you will not receive any
2-way confi rmations. Additionally, there will be a red X over
the "in range" indicator in the lower left corner of the status
screen (pictured to the left)�
This option selects how long the screen will stay lit
before turning back off� Keep in mind that longer settings
sacrifi ce some battery life. To program:
1) Press the "P" button to access the options menu�
2) Scroll down until "Screen Lighting" is highlighted
3) Press the  button to select�
4) Scroll to select the desired time interval�
3) Press the  button to select�