Table of Contents
Advertisement
Controller & Transmitter Overview
THE 2-WAY CONTROLLER
Controller part number: 156-03
1) Antenna: Sends commands to the system and
receives confi rmations for 2-way functions.
2) OLED Display: Displays all controller functions
as well as the status of your system�
3) Backlit Buttons: Flashes while transmitting and
indicates battery charging status�
4) Control Buttons: These are the primary use
buttons LOCK, UNLOCK, TRUNK, & START� They
are also used to navigate the controller's options�
5) Charger Port: This is where you plug in the
charger to recharge the controller's battery�
6) Programming Button: This is used for setting
controller features and many other functions� See
"programming controller options" on page 15�
THE CONTROLLER STATUS SCREEN
Vibration Mode Indicator
Melody Indicator
Battery Level Indicator*
Current System State
Vehicle Image
(Selectable)
2-way In Range
Indicator
*The controller is powered by a built-in rechargeable battery� When the battery level
indicator shows a low battery, plug the supplied USB cable into the controller, then
connect the other end to the supplied AC adapter, car adapter, or your computer's
USB port. While charging, the indicator will fl ash from empty to full and the backlit
buttons will fl ash once every 5 seconds while charging. When full, the indicator will be
solid green and the backlit buttons will stay illuminated�
4
4
5
Alarm Clock ON icon
Clock/Timer
Vehicle Name
(Programmable)
Lock/Unlock Indicator
1
2
3
4
6
Advertisement
Table of Contents
