Table of Contents
Advertisement
User Programmable Features (cont'd)
Feature #13 - NOT USED
Feature #14 - Ignition Activated Override
On
(press "lock" button to program)
Off
(press "unlock" button to program) - DEFAULT
This feature allows an activated system to be overridden and disarmed by simply
turning the ignition switch on within 10 seconds of the system's activation� After 10
seconds, the Emergency Override must be performed�
Feature #15 - Alarm Trigger Duration
30 Seconds
(press "lock" button to program) - DEFAULT
60 Seconds
(press "unlock" button to program)
90 Seconds
(press "trunk" button to program)
120 Seconds (press "start" button to program)
This feature selects the period of time for which the system sounds the siren (and/or
horn) and flashes the lights when triggered. Caution: Before lengthening the Alarm
Duration you should always check and determine if there are any local anti-
noise or nuisance ordinances in your area.
Feature #16 - Arming Delay
3 Seconds
(press "lock" button to program) - DEFAULT
15 Seconds
(press "unlock" button to program)
30 Seconds
(press "trunk" button to program)
45 Seconds
(press "start" button to program)
This selects how long the alarm waits to monitor trigger zones after arming.
Feature #17 - Open Door Warning Upon Arming
On
(press "lock" button to program)
Off
(press "unlock" button to program) - DEFAULT
When this feature is turned on, if one of the vehicle's doors is open at the time that
the system is armed via the controller or transmitter, the siren will chirp 3 times and
the parking lights will flash 3 times, instead of once.
22
Advertisement
Table of Contents
