The Status Light (cont'd)
SOLiD GREEn W/ RED FLASh: System is in remote start valet w/ the alarm armed
SOLiD RED W/ GREEn FLASh: System is in alarm valet w/ remote start activated
FAST ALTERnATES GREEn/RED: Alarm armed w/ remote start activated
SLOW FLAShinG GREEn W/ 1-4 RED FLAShES: Zone violation recall during
remote start mode
SLOW FLAShinG RED W/ 1 GREEn FLASh: System is armed and ready to remote
start in manual transmission mode
multi-Car Operation
The controller can operate up to 2 different systems. When controlling 2 systems, it
will receive all status updates on the currently selected vehicle profile and will receive
only trigger alerts for the 2nd vehicle. You can switch from one car to the other at
anytime. Use the following steps to change vehicles.
SELECTinG CAR #1 OR CAR #2
Vehicle #1: Press the "P" and "LOCK" buttons for 1 second to select Car #1. The
controller will beep/vibrate once and the clock will change to "CAR 1"
Vehicle #2: Press the "P" and "UNLOCK" buttons for 1 second to select Car #2. The
controller will beep/vibrate twice and the clock will change to "CAR 2"
Controller Options
LCD SCREEn iCOnS
Battery Level
Door Trigger
Trigger
in Range
indicator
in-RAnGE inDiCATOR
All primary commands sent to the system have a confirmation response that is
sent to the controller to indicate that the command was successful. If the command is
successful, the icon will not display the "X" in the middle of the icon. If no response is
received within a few seconds, the "X" will be displayed indicating that you may be out
of range of your system.
12
melody/Vibrate
Sensor
Trigger
hood
Clock
Remote Start
Shutdown
Carjack mode
Valet mode
Alarm Status