Setting The Clock; Changing Remote Start Melodies; Selecting Melody & Vibrate Modes; Parking Timer & Remote Start Timer - Excalibur AL-1850-EDPB Operation Manual

SETTinG ThE CLOCK

1) Press the "P" button for 5 seconds to access the controller features. The controller
will beep twice
2) Press and release the "P" button once to select the clock (hour digits will flash).
3) Press the "TRUnK" button to scroll up or the "
4) Press the "P" button to switch to the minute digits
5) Press the "TRUnK" button to scroll up or the "
6) Wait 15 seconds or press the "P" button to exit programming The controller will
beep once

ChAnGinG REmOTE START mELODiES

The controller has 5 different melodies to choose from for remote start ON and 5
melodies for remote start OFF confirmation.
1) Press the "P" button for 5 seconds to access the controller features. The controller
will beep twice
2) Press and release the "P" button 3 times to select the melody settings The clock
will change to "S 1" indicating "start melody #1" for the remote start ON melody.
3) Press the "TRUnK" button or the "
4) Press the "P" button to switch to the remote start OFF melody selection
5) Press the TRUnK button or the "
6) Wait 15 seconds or press the "P" button to exit programming The controller will
beep once
SELECTinG mELODy & ViBRATE mODES
Whenever 2-way alerts are received from the system, the controller can alert you
with a melody, vibration, or both. By default, the controller is set for melody only.
Press the "P" and "TRUnK" buttons simultaneously for 1 second to change the
setting. The melody & vibrate icons on the status screen will turn on & off indicating
your selection
PARKinG TimER & REmOTE START TimER
The controller has 2 convenient timer functions. The PARKING TIMER tells you
how long you've been parked in case you are at a parking meter or other parking
areas with time restrictions The REMOTE START TIMER tells you how long your
engine has been running in remote start mode
PARKinG TimER: Press LOCK twice within 5 seconds When the controller receives
both LOCK confirmations, it will start the timer.
REmOTE START TimER: This turns on every time you remote start
note: Pressing the "P" during either timer mode will switch between the timer
and clock.

BUTTOn LOCK

You can lock the buttons on the controller to prevent accidental button presses To
lock the buttons, press "TRUNK" and "
unlock the buttons
Controller Options (cont'd)
*
" button to scroll down
*
" button to scroll down
*
" button to scroll through the melodies
*
" button to scroll through the melodies
*
" simultaneously for 1 second. Repeat this to
13