Settings For Kl3228-0000; Sample Program For Kl Register Communication Via Ethercat On Kl3314 Exemplary; Fig. 20 Kl3228 - Settings Dialog - Beckhoff KL3208 Manual

Eight channel input terminals for pt1000, ni1000, ntc

Table of Contents

User Defined

If user-defined NTC (255

4.4

Settings for KL3228-0000

The dialog mask for the parameterization of the KL3228-0000 can be found under Settings.

Fig. 20: KL3228 - Settings dialog

Operation mode

Here you can

• activate the user scaling (enUsrScale, R32.0 [} 43]) and

• the manufacturer scaling (enManScale, R32.1 [} 43]), or

• disable the channel completely (disChannel, R32.11 [} 43]).

Resistance thermometer (sensor type)

Here you can set the KL3228-0000 to the connected sensor type (R32.15-R32.13 [} 43]):

• PT1000

• NI1000 with standard characteristic curve

• NI1000 with Landis&Staefa characteristic curve (1500 Ω = 100 °C)

4.5

Sample program for KL register communication via

EtherCAT on KL3314 exemplary

Using the sample programs

This document contains sample applications of our products for certain areas of application. The

application notes provided here are based on typical features of our products and only serve as ex-

amples. The notes contained in this document explicitly do not refer to specific applications. The

customer is therefore responsible for assessing and deciding whether the product is suitable for a

particular application. We accept no responsibility for the completeness and correctness of the

source code contained in this document. We reserve the right to modify the content of this docu-

ment at any time and accept no responsibility for errors and missing information.

KL3208, KL3228/KS3228

, see Register R39 [} 44]) was selected, you can enter its parameters here.

dec

Version: 3.3.0

Configuration Software KS2000

Table of Contents

Table of Contents

Kl3228 Ks3228