Beckhoff KL3208 Manual page 44

Access from the user program
Key
Bit Name
R32.15... SensorType 0000
R32.12
R32.11 disChannel
R32.10... -
R32.6
R32.5 Resolution
R32.3/4 -
R32.2 DisWdTimer Disable Watchdog Timer
R32.1 enManScal
R32.0 enUsrScal
R33: User scaling – offset
This register contains the offset of the user scaling. User scaling can be activated in the feature register via
bit R32.0 [} 43].
R34: User scaling – gain
This register contains the gain of the user scaling. User scaling can be activated in the feature register via bit
R32.0 [} 43].
R37: Filter constant of the A/D converter
Value in R37
0x0000
0x0050
0x00A0
0x0140
0x0280
R39: Further elements
Register R39 is supported by KL3208-0010 from firmware version 1C and hardware version 01 (Default: 0
Setting R39 increases the conversion time to one second per channel
As soon as register R39 is not equal to 0 for one channel of the terminal, the conversion time for all
channels is increased to about 1 second per channel, automatically and irrespective of the sensor
type, in order to optimize the measuring accuracy. The conversion time for all channels can be com-
monly set via register R40 of channel 1. A reduction is not recommended due to loss of accuracy.
44
Description
PT1000
bin
0001 NI1000
bin
0010 RSNI1000 (note: different characteristic curve, similar to
bin
NI1000, but with 1000 Ω at 0 °C and 1500 Ω at 100 °C)
0 Channel switched on
bin
1 Channel switched off
bin
reserved
R32.5=1: high resolution 1/100°C (default for KL3208-0010)
R32.5=0: standard resolution 1/10°C
reserved
0 Manufacturer scaling is not active
bin
1 Manufacturer scaling is active
bin
0 User scaling is not active
bin
1 User scaling is active
bin
First Notch
25 Hz
100 Hz
50 Hz
25 Hz
12.5 Hz
Version: 3.3.0
default
0
0
0
0/1
0
0
0
0
Conversion time
250 ms
65 ms
125 ms
250 ms
500 ms
KL3208, KL3228/KS3228
bin
bin
bin
bin
bin
bin
bin
)
dec