GE Dash 3000 Service Manual page 17

Introduction: Equipment symbols
This symbol indicates the date of manufacture of this device. The first four digits identify the
year and the last two digits identify the month.
2005-08
Non-ionizing electromagnetic radiation: To indicate elevated, potentially dangerous, levels
of non-ionizing radiation. Note - In case of application in a warning sign the rules according
to ISO 3864-1 shall be adhered to.
IEC 60878 note: See safety sign ISO 7010 - W005 "Warning, non-ionizing radiation".
FCC. USA only. Complies with applicable US government (Federal Communications
Commission) radio-frequency interference regulations.
Manufacturer name and address.
Device serial number.
Russia only. GOST-R certification, where XXXX indicates the four-digit certification body
number determined by product.
Catalog or orderable part number.
European authorized representative.
Prescriptive device. USA only. For use by or on the order of a physician, or persons
licensed by state law.
CAUTION — Safety ground precaution. Remove power cord from the mains source by
grasping the plug. Do not pull on the cable.
2000966-542D Dash 3000/4000/5000 1-7