GE Dash 3000 Service Manual page 145

Analyze WIRELESS LAN STATUS screen
2000966-542D
Troubleshooting: Wireless LAN
Display the WIRELESS LAN STATUS screen by entering Service
Mode (see "Access Service Mode" on page
SETTINGS > WIRELESS LAN STATUS.
The WIRELESS LAN STATUS screen displays the same information as
the WIRELESS LAN ID field along with advanced status fields.
Personnel with specialized training (hospital IT or network engineer) can
interpret this information.
1. Check that the information updates every 4 seconds indicating
communication.
2. Check for the following status information:
ASSOCIATION
TRANSMIT RATE
PERCENT CRC ERRORS
TRANSMIT FAILURES
3. If the ASSOCIATION status in the WIRELESS LAN STATUS
window is other than CONNECTED, see
wireless LAN" on page 4-14 to check if the wireless feature is
enabled.
Contact GE Technical Support for additional assistance.
Dash 3000/4000/5000
6-25) and selecting MONITOR
Check this value
to determine if
wireless is
enabled
Check these
values to
determine network
communication
CONNECTED
Greater than 5.5 Mbit
00
00000
"Confirm or configure
945A
6-29