Table of Contents
Advertisement
Displaying the limit
values
84
•
: It switches ON, when
(measured temperature < low limit) OR
(measured temperature > high limit)
The output switches ON, when the displayed temperature
is lower than the numerical value defined as the
parameter OR higher than numerical value defined as
the
.
Example for the application:
It indicates that the measured temperature out of the
desired limits.
(Switching the displaying on: from the 04.LD menu item.)
•
Both outputs are OFF:
•
Output 1 is ON, output 2 is OFF:
•
Output 1 is OFF, output 2 is ON:
•
Both outputs are ON:
If the Alarm Mode is ON, and the given output is in alarm
status, the above displays appear blinking. The blinking
stops only when the acknowledgement is done manually
(Upon pressing the ENTER button.)
DT9500
20220103-V2
Advertisement
Table of Contents
