Table of Contents
Advertisement
Sequence of operations
Exit from the menu item 1. After finishing the setting, press the MENU button, to exit
Exit from the menu
48
•
: The displayed value is the same as the last
measurement result; the previous measurements do not
influence this value.
(The display settling time after the stabilisation of the input
signal: 0.1 second.)
•
: The displayed value is the average of the last 2
measurements.
(The display settling time after the stabilisation of the input
signal: 0.1 second.)
•
: The displayed value is the average of the last 4
measurements.
(The display settling time after the stabilisation of the input
signal: 0.3 seconds.)
from the menu item, and you see this:
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in,
go on with the operation from point 3 of the Sequence of
operations.)
(3. If you don't want to exit the menu, as you want to do
further settings, then you may select the desired menu
items by pressing the ▲ button.)
1. Press the MENU button. First the mnemonic
(Save), then the mnemonic
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.
(Exit) are shown on the
DT9500
.
20220103-V2
Advertisement
Table of Contents
