D.3.1.1Display / Touchscreen Calibration; D.3.1.2Cleaning; D.3.1.3Accessories, Enable In Software - Electrolux SKYLINE 6-10-20GN Service Manual

D.3.1.1 Display / Touchscreen calibration
D.3.1.2 Cleaning
Before starting any washing cycle the appliance will check the inner cavity temperature, if the inner temperature is too hot the
appliance will proceed to a "Forced cooling".
D.3.1.3 Accessories, enable in software
NOTE!
• IN THE ACCESSORY PACKAGING BOX IS CONTAINED A DEDICATED MANUAL WITH DETAILED EXPLAN-
ATION/FOLLOW THE QR CODE TO ACCESS THE MANUALS.
• If any accessories is added to an oven, it may be necessary to enable the item: first it will be necessary to enter into
the parameter list and "add in/enable" the parameter, EXAMPLE: lets say we need to add the accessory liquid
detergent kit 922618, enter in Service/parameters and enable/disable and/or adjust parameters 45, 47, 55, 416.
2
Cycle stop Keep hold to stop the cycle; The Stop button will
be available when the function can be performed. After the
selection the display will show the remaining time for the
rinsing of the cavity and of the boiler.
Forced rinse if you have stopped a running cleaning cycle,
the appliance may proceed to perform a forced rinse to
washout all the chemicals from the cavity. During this count
down the door cannot be opened.
3
19