D.3.3.4Programming File Upload (Software Upload) - Electrolux SKYLINE 6-10-20GN Service Manual

PRIDE/Internet Explorer unzipping
Click on one of the files
3
Now will appear a dialogue box for the download;
depending on the unzipping program you have installed on
your PC the view could change Press SAVE AS
D.3.3.4 Programming File upload (Software Upload)
The Programming file (that from now on we will call P.F. as
abbreviation) is the software application of the oven and this is
stored in the UI.
The P.F. will update the software edition refer to the UI App
version at chapter D.3.1.4 Oven Identity Card.
The P. F installation will NOT erase the recipies of the customer nor change any personalization, parameters etc ; the software
update will update the application, not the parameters!!
WHEN TO UPDATE:
• When ever you see an older version UI application software chapter. The P.F. will update the software edition refer to the UI App
version at chapter D.3.1.4 Oven Identity Card.
• In case of any spare part replacement (UI, ACU)
NOTE!
If a P.F has been updated it is mandatory to install also the latest parameter file P.P.
42
2
Double click on the file
4
The downloaded zipped file must NOT be saved into your
USB key (DRIVE), it needs to be saved elsewhere and then
unzipped into your USB. In this illustration we have created on
our desktop a folder "digit programming file zip".