Table of Contents
Advertisement
7.
PROGRAMMABLE PARAMETERS
Parameters available in configuration program are divided into groups: Access,
Transmission, Inputs/Outputs, Monitoring, Restrictions, SMS Notifications, Link
control, Phone line and Firmware. Every from these groups will be described in
detail in next part of this manual.
7.1.
ACCESS
7.2.
Parameters
7.2.1.1.
Depending of user preferences, a device may operate in 1 out 4 modes (available
from scrolled list) :
o GPRS & SMS: GPRS standard transmission (TCP/IP Protocol), and if any
problems follow with this link it automatically SMS mode will follow.
o SMS: Transmission only in SMS mode, without trial to establish GPRS link
o GPRS: GPRS standard transmission (TCP/IP Protocol), and in case of any
problems with this link no transmission will follow.
o Serverless: no transmission to the server with is possible, remote
communication possible only via SMS notifications to the user
LX2N_Manual_en-1.11i66
Device mode
Page 22 / 56
Advertisement
Table of Contents
