Table of Contents
Advertisement
7.3.1.3.
When using public APN , user ID is mostly not required. For private APN this
parameter shall be obtained from operator (it is impossible to be granted access to
GPRS network without it).
Note : Private APN provides for higher system security.
7.3.1.4.
It determines address of main and backup DNS server (Domain Name System).
If IP server address has been entered in form of domain it is required to provide
minimum one DNS address.
7.4.
Main Server Parameters
7.4.1.1.
It is address of receiver of monitoring system (OSM.2007) or computer where
"Communication Server" software has been installed , e.g. 89.123.115.8. This
address may be provided in domain name of server, e.g. modul.gprs.com. In this
case it is required to provide minimum one address of DNS server.
7.4.1.2.
It determines server port that was selected in server for collection of data from
transmitter.
7.4.1.3.
Programmable
and equipped with SIM card device will try to make automatic
connection with server. In this field you define interval (in seconds) after which next
connection will follow if the previous connection failed.
7.4.1.4.
In this filed you determine how many times device will try to make connection to
server. If connections fail, LX after execution of some connection will start
procedure of connection to back up server. This option is active only if we define
parameters of backup server.
7.4.1.5.
Mark this check box means, that the device will try in first order to connect to
primary server, without regard on definition of parameters for backup server (in
peculiarity of number of connection attempts).
LX2N_Manual_en-1.11i66
User password
DNS1 and DNS2
Server IP Address
Server port
Interval between subsequent connection attempts
Number of connection attempts
Order of connection to servers
Page 24 / 56
Advertisement
Table of Contents
