Introduction - EBS LX2N Installation And Programming Manual

1.

INTRODUCTION

Transmitter GPRS type LX is an advanced microprocessor device, made with
surface moulding technology and designed according to the latest trends. This
transmitter is purposed for data transmitting from electronic security systems of
facilities and other technical devices with the use of GSM mobile phone network.
Data transmission follows via GPRS or SMS.
Due to many settings a transmitter may be applied with many systems of various
requirements The device is basically purposed for data transmission from security
systems installed in detached houses and in small business facilities. It also have
input for connection of
provides for a cheap system of data transmission.
Communication with a monitoring station follows by GPRS/SMS mode. This device
provides an opportunity to send text messages to private mobile phones.
An advanced encoding methods like a 256 bytes encoding key and AES (Advanced
Encryption Standard) provides for security of data transmission. As a result
reception of this transmission is possible with OSM.2007 monitoring receiver
system.
Programming of receiver is possible:
o Locally
configurator" software
o Remotely
LX2N_Manual_en-1.11i66
an alarm control panel's phone communicator.
on computer and
- via GPRS connection
- via SMS commands
- via transmission on CSD canal
with recommended
This
"GPRS transmitter
Page 6 / 56