Table of Contents
Advertisement
7.15. LINK CONTROL
These options enable automatic action of device if communication with monitoring
station was broken up. It relates to situations when device lost connection to GSM
network or if GPRS transmission is impossible.
7.15.1. GSM
Activate this function (mark [Turn On] field) to get access to parameters
determining action of device if outside GSM network.
Define time limit after which transmitter shall reconnect to network. Enter time
limit in field [Reset after ] and provide this value in minutes.
Next define action that the device shall perform. Select action by marking proper
square next action description:
o Modem Reset
o Device Reset
o Turn onoutput
o
In case of no connection with GSM network the device after recognizing the
situation shall wait during provided time limit and then shall perform programmed
actions.
LX2N_Manual_en-1.11i66
Page 41 / 56
Advertisement
Table of Contents
