Monitoring; Gprs On / Gprs Off; Sms On / Sms Off - EBS LX2N Installation And Programming Manual

7.12. MONITORING

Thanks to this option you may determine which of available signals generated by
the device shall be transmitted to monitoring station.
NOTE: "Configuration changed" event refer to configuration changes made
by SMS or GPRS commands.

7.12.1. GPRS On / GPRS Off

In this column you define signals that are to be reported to monitoring station with
GPRS transmission. There is possibility to send information on alarms (input state
change from rest to action status) and on returns of input state from action to rest
(normalization).
To transmit any signal you should only click it (proper square on your right).
Click on [Clear] button to remove all marked signals.
Click on [Invert] button to change markings to contrary.

7.12.2. SMS On / SMS Off

In this column you define signals that may be reported at monitoring station with
SMS messages – when there is no connection with server over GPRS. There is
possibility to send information on alarms (input state change from rest to action
status) and on returns of input state from action to rest (normalization).
To transmit any signal you should only click it (proper square on your right).
LX2N_Manual_en-1.11i66 Page 33 / 56