User Programmable Features - Excalibur AL-1775-3DB Operation Manual

User Programmable Features

Feature #1 - Remote Start Run Time
3 Minutes (press LOCK to program)
10 Minutes (press UNLOCK to program)
15 Minutes (press TRUNK to program)
20 Minutes (press START to program)
30 Minutes (press LOCK & UNLOCK to program)
This sets the maximum amount of time that the remote start will keep the engine running if
it is not shut down by other methods
Feature #2 - Flashing Light Confirmations
Unlock: ON, RS: ON
Unlock: ON, RS: Flash
Unlock: Flash, RS: ON
Unlock: Flash, RS: Flash (press START to program)
This feature affects the parking light confirmations for system unlock & remote start func-
tions With the above options, you can select any combination of:
Unlock: Flash - Flashes twice after unlock
Unlock: ON - Flashes twice then stays on for 30 seconds after unlock
RS: ON - Stays on during remote start mode
RS: Flash - Flashes once every 15 seconds during remote start mode
Feature #3 - Confirmation Chirp Volume
Low (softest)
Medium Low
Medium High
High (loudest)
This feature allows the choice different chirp volume levels, and when programming it,
each selection will be confirmed in the chosen volume making it easy to choose the most
suitable setting
Feature #4 - BROWN Wire Audible Output
Pulsed Horn Low
Pulsed Horn Medium
Pulsed Horn High
Steady Siren
Random
This changes the BROWN wire's audible output when the alarm is triggered Steady siren
must be selected when using a siren (other horn outputs stay at the Medium setting) The
horn honk options will affect all horn honk outputs used as well as change the BROWN
wire's function
Feature #5 - Ignition Controlled Lock/Unlock
Off
Lock w/ Ignition On
Unlock w/ Ignition Off
Lock And Unlock w/ Ignition
This feature controls the lock/unlock operations when the ignition key is turned on/off,
16
(press LOCK to program)
(press UNLOCK to program)
(press TRUNK to program)
(press LOCK to program)
(press UNLOCK to program)
(press TRUNK to program)
(press START to program)
(press LOCK to program)
(press UNLOCK to program)
(press TRUNK to program)
(press START to program)
(press LOCK & UNLOCK to program)
(press LOCK to program)
(press UNLOCK to program)
(press TRUNK to program)
(press START to program)