User Programmable Features - Excalibur RS-360-EDP Operation Manual

User Programmable Features

Feature #1 - Remote Start Run Time
10 minutes (press "lock" button to program) - DEFAULT
5 minutes
(press "unlock" button to program)
15 minutes (press "trunk" button to program)
20 minutes (press "start" to program)
This sets the maximum amount of time that the remote start will keep the engine
running if it is not shut down by other methods�
Feature #2 - Flashing Light Confirmations
Unlock: ON, RS: ON
Unlock: ON, RS: Flash
Unlock: Flash, RS: ON
Unlock: Flash, RS: Flash (press "start" button to program) - DEFAULT
This feature affects the parking light confirmations for system unlock & remote start
functions� With the above options, you can select any combination of:
Unlock: Flash - Flashes twice after unlock�
Unlock: ON - Flashes twice, then stays on for 30 seconds after unlock�
RS: ON - Stays on during remote start mode�
RS: Flash - Flashes once every 1�5 seconds during remote start mode�
Feature #3 - Confirmation Chirp Volume
Low (softest)
medium Low
medium high
high (loudest)
This feature allows the choice of different chirp volume levels, and when programming
it, each selection will be confirmed in the chosen volume making it easy to choose the
most suitable setting�
Feature #4 - BROwN wire Audible Output
Pulsed horn Low
Pulsed horn medium
Pulsed horn high
Steady Siren
This changes the BROWN wire's audible output when the alarm is triggered� Steady
siren must be selected when using a siren (other horn outputs stay at the Medium
setting)� The horn honk options will affect all horn honk outputs used as well as
change the BROWN wire's function�
Feature #5 - Ignition Controlled Lock/Unlock
Off
Lock w/ Ignition On
Unlock w/ Ignition Off
Lock And Unlock w/ Ignition
This feature controls the lock/unlock operations when the ignition key is turned on/off�
Feature #6 - Open Door Bypass of Ignition Locking
On (press "lock" button to program) - DEFAULT
Off (press "unlock" button to program)
This feature cancels the automatic locking or unlocking of the vehicle's doors if one of
the doors is open when the ignition switch is turned on or off�
12
(press "lock" button to program)
(press "unlock" button to program)
(press "trunk" button to program)
(press "lock" button to program)
(press "unlock" button to program)
(press "trunk" button to program) - DEFAULT
(press "start" button to program)
(press "lock" button to program) - DEFAULT
(press "unlock" button to program)
(press "trunk" button to program)
(press "start" button to program)
(press "lock" button to program) - DEFAULT
(press "unlock" button to program)
(press "trunk" button to program)
(press "start" button to program)