Table of Contents
Advertisement
This group of User Programmable Features are all accessed as a group in the first
level of features' programming. These features have a direct affect upon the sys-
tem's operations, so the programming and operation of each are described.
Feature #1 Remote Start Run Time
10 minutes
(press the brake pedal 1 time to program) - DEFauLT
5 minutes
(press the brake pedal 2 times to program)
15 minutes
(press the brake pedal 3 times to program)
20 minutes
(press the brake pedal 4 times to program)
This feature sets the period of time that the engine will run after being remotely
started. If the engine is not stopped by controller/transmitter command or a safety
circuit violation, the engine will automatically stop upon the expiration of the selected
time period. Caution: The remote engine starting feature should NEVER be
used when the vehicle is parked in an enclosed structure or garage.
Feature #2 Steady/Flashing Lights During Remote Start
Steady
(press the brake pedal 1 time to program) - DEFauLT
Flashing
(press the brake pedal 2 times to program)
This Feature configures the operation of the vehicle's parking lights during the
remote start operation. The default setting turns on the parking lights during remote
start; the other setting flashes the parking lights on and off during remote start.
user Programmable Features
7
Advertisement
Table of Contents
