Battery - FrontRow ITR-02 User Manual

Battery

Installing the battery
1. Unscrew battery door on the back of the
microphone using the supplied Phillips
screwdriver.
See Image 1
2. Locate the charge contacts on the battery
and on the microphone.
3. Insert battery into compartment - battery
contacts first, then push the battery into
place.
See Image 3
4. Replace battery door.
5. For best performance, charge battery
overnight before initial use.
NOTE: When the battery is removed, it will
take 2-3 charge/discharge cycles for the battery
to report accurate status to the FrontRow
Desktop or Teacher Edition application.
Battery Safety
Warning: To reduce risk of fire or burns:
• Do not use batteries that have been
dropped or otherwise damaged.
• Do not attempt to open, disassemble or
service the battery pack.
• Do not crush, puncture or short external
contacts or dispose of in fire or water.
• Do not use battery if exposed to moisture.
When exposed to moisture, red checked
pattern of moisture indicator will disappear.
See Image 2
• Do not expose to temperatures above
40°C (104°F)
• Replace only with the battery pack
designed for this product.
• Batteries shall not be exposed to excessive
heat such as sunshine, fire or the like, or
excessive cold.
See Image 2
Image 1
Image 2
Image 3
39
Moisture Charge
indicator
contacts