FrontRow ITR-02 User Manual page 30

Bluetooth Button functions
Short press
Press and hold for 3 seconds
While in pairing mode
(LED is flashing): Double-press
While in pairing mode
(LED is flashing):
Hold for 3 seconds
Bluetooth settings
All devices have a Bluetooth settings screen where you can:
• Pair devices
• Connect and disconnect
• Forget devices (the opposite of pairing)
There may also be alternate, easier ways of connecting and disconnecting without going to the settings.
NOTE: Your device experience may differ, depending on the model and version of the operating
system.
Bluetooth on Mac
To pair or forget devices:
Go to System Preferences, then to the
Bluetooth settings.
You can also use the menu bar Bluetooth icon to easily connect or disconnect from Juno.
Puts Juno in pairing mode so that you can pair your devices. The LED
will flash when in pairing mode. Juno will remain in pairing mode for
60 seconds.
"Reboots" the Bluetooth module. Use this if you are having trouble
connecting to Juno.
Exits pairing mode.
Clears the list of paired devices and reboots the Bluetooth module.
Use this as a last resort for troubleshooting, or if unauthorized users
have paired with Juno. You will need to pair all of your devices again.
Once paired, you can right click (or control
click) to connect or disconnect from Juno.
28