ITM-02 Pendant Microphone
Using
1. Place microphone around neck and
connect clasp.
2. Adjust neck straps to position microphone
approximately 5in (14cm) from mouth.
3. Press One-Touch button to wake microphone.
Power indicator should be green.
NOTE: Your microphone will go into standby
mode (off) automatically after 10 minutes in
mute mode or 10 minutes of silence. Press
One-Touch button to wake.
4. Momentarily press One-Touch button to mute
as needed for private conversations. Mute
indicator light will turn red.
5. Press and hold One-Touch button to issue a
voice command. For detailed instructions on
using Voice Command see page 19.
6. When the battery in your microphone gets
low, the battery indicator will flash red.
7. At the end of the day, charge your
microphone. (See page 34)
5in/14cm
power indicator
mute
indicator
One-Touch
button
38
battery
indicator
Need help?
Do you have a question about the ITR-02 and is the answer not in the manual?
Questions and answers