Playing Audio Over Bluetooth; Pairing Your Bluetooth Device With Juno - FrontRow ITR-02 User Manual

Playing Audio over Bluetooth

Juno is equipped with the Bluetooth Audio Receiver, which allows you to stream audio
wirelessly to Juno from phones, tablets, and computers. This allows teachers to be
"untethered" from the audio system and move about the room.
To play audio over Bluetooth, you will first need to pair the device you want to stream from.
(You only need to pair a device once.) After it is paired, the device can stream audio whenever
"connected" to Juno. On the device settings you can connect and disconnect from Juno.
Pairing your Bluetooth
Pairing setup
1. Press the Bluetooth button on the back of
the Juno Tower to activate pairing mode.
See Image 1
2. Juno will play a tone and the button will
flash blue.
3. Go to the Bluetooth settings on your
computer, phone, or tablet and look for
FrontRow Juno xxxx (a 4-digit number),
then pair with the device.
Once device is paired:
1. When connected, the Juno will play a chime
tone and the Bluetooth button will be
solid blue.
See Image 3
2. Your device is now ready to stream music
and more!
NOTE:
• You only need to pair each device once.
• You can connect up to two devices at
once, but only one can stream at a time.
• You can disconnect and re-connect to
Juno at any time using your device settings
or quick access menus (varies by device).
• I f you go out of range, you will need to
re-connect when you return.
device with Juno*
®
See Image 2
27
Image 1
Image 2
Image 3