JRC JMA-9123-7XA Instruction Manual page 257

JMA-9100 Instruction Manual
EBL1
①
During the operation of parallel index lines, pressing the [EBL1] or [EBL2] key
disables operation for rotation directions. Pressing the [VRM1] or [VRM2] key
disables operation for parallel index line intervals.
4.1.4.3 Settings in PI Menu (PI Menu)
The operation of parallel index lines can be set in the PI Menu.
Procedures
1) Left-click the
[1] Display for All Lines
Sets the parallel index line display to on or off.
>
4.MEASUREMENT OF RANGE AND BEARING
HL
①
③
②
④
EBL2
②
button to open the PI menu.
PI
On :Parallel index lines are displayed.
Off :Parallel index lines are not displayed.
4－ 9
>
4.1 USE OF NAVIGATION TOOLS
VRM 1 VRM 2
③ ④
4