JRC JMA-9123-7XA Instruction Manual page 138

>
JMA-9100 Instruction Manual 3.BASIC OPERATION
3.3.4.1 Numeric value input screen
Numeric button
- button
Clear button
3.3.4.2 Directly entering a numeric value
Procedures
1) On the numeric value input screen, sequentially left-click the
software number keys located on the radar screen, and enter a
desired numeric value.
For example, when entering
click the software number keys as shown below.
2) Make sure that the entered value is correct, and left-click the
ENT
The set value is reflected to the operating state.
To stop entering a value, right-click the [ENT] button.
3)
Alternatively, left-click the
The numeric value input screen will close without reflecting the set value to the operating
state.
>
3.3 OPERATION PROCEDURES
→
1
button.
3－ 18
Entered value
+ button
Enter button
→ → for a bearing value, sequentially left-
2 3 4
CLR button.