Printing on Special Media
Caution:
Do not insert paper before
you turn on the printer.
Loading Roll Paper
1. Before you load roll paper, follow the instructions on
page B-8 to set up the printer for banner printer using
default-setting mode. Select these options:
Turn banner mode on so the printer doesn't advance
all the roll paper out of the printer if you press the
button.
LF/FF
Turn auto tear-off mode on so the printer can advance
the roll paper to the correct cut-off position.
When you've finished setting these options, turn off the
printer to exit default-setting mode, wait 5 seconds, then
turn on the printer before continuing with step 2.
2. Move the paper-release lever backward to the single sheet
position.
3. Set the thickness lever backward to the 0 position.
3-24