Epson Stylus Color 3000 User Manual page 73

4. Open the banner paper cover.
5. Slide both edge guides as far away from the center as they
can go.
6. Position the banner paper roll so that the paper feeds into
the printer from the top of the roll (the printable side is
face up).
Place the banner paper roll on the right roll paper holder.
Then slide the left banner paper holder to match the roll's
width. Make sure the holders are snug against the banner
paper roll, but do the squeeze the paper too tightly;
otherwise the roll will not rotate properly.
3-25
Printing on Special Media