Epson Stylus Color 3000 User Manual page 85

Deleting a Stalled Print Job
If you have trouble printing, it may be because of a stalled print
job. Follow these steps to delete it so you can continue printing:
1. Open the Spool Manager as described on page 4-2.
2. Click on any print jobs marked
Document menu and click
3. Click .
Yes
4. Exit Spool Manager and try printing again.
Changing the Default Spool Directory
If you get an error message when you try to print, or printing is
very slow, you can try changing your default spool directory.
Follow these steps:
1. Make a directory on your hard disk where you want
Spool Manager to store print job files, for example,
C:\SPLTEMP.
2. Open the Spool Manager as described on page 4-2.
3. Choose
Default Spool Directory
4. In the dialog box, change the spool directory to the one you
created in step 1. Then click
5. Make sure
EPSON S
then choose
Setup
Setup dialog box appears.
6. Make sure the spool directory is the same as in step 1. Also
make sure
Use Print Manager for this port
you're using Windows 95 and don't see the Status Monitor
when you print, leave it unchecked.) Click
7. Close Spool Manager.
4-3
Managing Print Jobs and Network Printing
, then open the
Held
.
Delete
from the Options menu.
.
OK
tylus 3000 is selected, and
COLOR
from the Queue menu. The Queue
is checked. (If
.
OK