For parallel connection: a high-speed bidirectional,
IEEE-1284 compliant parallel cable, 6 to 10 ft. (1.8 to 3 m)
long, with a D-SUB, 25-pin, male connector for your
computer and a 36-pin, Centronics
for the printer
For IEEE 1394 (FireWire) connection: the optional IEEE
1394 port (C823722) and a shielded IEEE 1394 cable
For network connection: the optional Ethernet card
(C12C823912) and a compatible cable
Macintosh System Requirements
To use your printer in either a standalone or peer-to-peer
network environment, your Macintosh system should include
these requirements:
OS 8.5.1 through 9.X (OS 9.2.2 recommended)
500 MHz or higher processor recommended
512MB of RAM
At least 25MB of free hard disk space to install the software,
and at least 2GB of free hard disk space for processing files
(8GB or more available hard disk space recommended)
Quad-speed (4×) or faster CD-ROM or DVD drive for
installing the printer software
For IEEE 1394 (FireWire) connection: the optional IEEE
1394 card (C823722) and a shielded IEEE 1394 cable
For network connection: the optional Ethernet card
(C12C823912) and a compatible cable
3
Introduction
®
compatible connector