Epson Stylus Color 3000 User Manual page 22

Basic Printing
Note:
Whenever you change the
Paper Source, Paper Size,
or Orientation settings,
check the printer
illustration in the dialog
box to see how your
document will print.
If you load your paper
long edge first, select a
landscape paper size, such
as Letter (Landscape), and
then select your print
orientation so the printer
knows which way you
loaded the paper.
Keep in mind that some
software may have paper
size and orientation
settings that override your
printer software settings.
To cancel your changes
and exit the driver, click
the Cancel button at the
bottom of the menu at
any time.
9. Click the
Paper
source.
The default Paper Source is
paper tray at the front of your printer. (For instructions on
printing with the other feeders, see Chapter 3.)
10. Now choose the paper size, number of copies, collation
options, orientation, and printable area. (Your software
application may let you control some of these settings.
With Windows NT, there are no collation options.)
11. Click the
Main
the bottom of the menu to see if the other settings are
correct for your document. If you need to adjust them, use
Advanced mode as described in Chapter 2.
12. Click when you're finished checking your settings. The
OK
dialog box closes.
13. In your application's printing dialog box, click
or . (You may need to click a series of these buttons,
Print
depending on the program you're printing with.)
1-4
tab and choose your paper size and feeding
Auto Sheet Feeder
tab and check the Current Settings box on
, for the
Click to select
your paper size
Click to select
your paper source
, ,
Close OK