Caution:
Load paper that's at least
8.3 inches (210 mm) wide
so ink doesn't spray onto
the platen.
Aligning the Print Heads
If your printouts contain misaligned vertical lines, you may
need to align the print heads. There are several ways to do this:
You can use the print head alignment utility in your printer
software, as described below.
You can also use the control panel to align the print heads.
Use one of the utilities if your printer is connected directly to
the computer. Use the control panel if your printer is connected
via an optional network interface card.
Using the Print Head Alignment Utility
1. Make sure the printer is turned on and paper is loaded in
the paper tray (see page 3-7 for instructions).
2. Access the Main printer settings dialog box as described in
Chapter 1.
3. Click the
Utility
(Macintosh). You see the Utility menu.
4. Click the
Print Head Alignment
5. Follow the instructions on the screen to print an alignment
test page and select the correct alignment.
5-7
Maintenance and Transportation
tab (Windows) or the
icon.
button
Utility