Epson Stylus Color 3000 User Manual page 134

Specifications
Paper type Size
Continuous Minimum size each sheet:
paper 4 to 16 × 4 inches
(101.6 to 406.4 × 101.6 mm)
Continuous label Minimum size each backing
paper sheet:
4 to 16 × 4 inches
(101.6 to 406.4 × 101.6 mm)
Minimum label size:
2.5 × 0.94 inches
(63.5 × 23.9 mm)
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at
any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always
test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams and other problems. If you
encounter problems, switch to a higher grade of paper.
Ink jet paper, envelopes, glossy film, glossy paper, transparencies, self adhesive sheets, back light
film, and canvas cloth are usable only under these conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity:
EPSON Photo Quality Glossy Film and Photo Quality Self Adhesive Sheets should be stored under
these conditions:
Temperature: 59 to 86 °F (15 to 30 °C)
Humidity:
Printable areas
Single sheets and
index cards
A
BL
40 to 60% RH
20 to 60% RH
A: The minimum top margin is 0.12 inch (3.0 mm).
BL: The minimum left margin is 0.12 inch (3.0 mm); except for A3
landscape, A2 portrait, US B landscape, and US C portrait, which are
0.2 inch (5 mm).
BR
BR: The minimum right margin is 0.12 inch (3.0 mm); except for A3
landscape and A2 portrait, which are 0.2 inch (5 mm), and US B
landscape and US C portrait, which are 0.43 inch (11 mm).
C
C: The minimum bottom margin is 0.55 inch (14.0 mm).
Note:
The maximum printable width is 16.3 inches (416 mm)
regardless of the paper size or feeder you use.
Paper types Thickness
Plain paper 0.0025 to 0.0039 inch
(0.065 to 0.1 mm)
Plain continuous Maximum total
label paper thickness:
0.0079 inch (0.2 mm)
Maximum label
thickness:
0.0047 inch (0.12 mm)
B-4
Weight
14 to 22 lb
2
(52 to 82 g/m )
—