Loading Paper In The Manual Feeder - Epson Stylus Color 3000 User Manual

Printing on Special Media
Note:
Make sure that paper
isn't loaded in the manual
feeder at the top of the
printer before sending
your print job. If paper is
loaded in the manual
feeder, the printer will
print on it instead of the
paper in the built-in sheet
feeder.
Note:
To load banner paper,
canvas cloth, or other
roll paper in the manual
feeder, you must use
the roll paper holder. See
page 3-23 for
instructions.
13. Now follow the instructions in Chapters 1 or 2 to select the
correct
Paper Source
your printer software. Then send a print job.
If the printer runs out of paper during a print job,
reload the paper tray and press the
continue printing.
If the ink smears on your document, set the thickness
lever to the + position and reprint; see page 3-7.
If your margins are not where you like them, adjust
them in your application software. However, if the
problem seems to be with your paper's loading
position, you can change it using the
buttons; see page 3-20 for instructions.

Loading Paper in the Manual Feeder

You can load one single sheet of paper in the manual feeder
without removing paper from the paper tray. Load any type of
paper that is between 4.1 inches (105 mm) and 17 inches
(432 mm) wide. Always load paper before you send a print job.
1. Turn on the printer.
2. Move the paper-release lever backward to the single sheet
position.
3-12
, , and other settings in
Paper Size
Pause
Micro Adjust
button to