Cleaning The Printer; Transporting The Printer - Epson Stylus Color 3000 User Manual

Caution:
Don't touch the gears
inside the printer.
Never use alcohol or
thinner for cleaning; they
can damage the printer
components and case.
Don't use a hard or
abrasive brush.
Don't get water on the
printer components.
Don't spray lubricants or
oils inside the printer.
6. Press the
Pause
aligning the print heads using the control panel.
7. Follow the instructions on the sheet. When the print heads
are aligned, turn off the printer to exit print head alignment
mode.
8. After five seconds, turn on the printer to resume printing.

Cleaning the Printer

To keep your printer working at its best, you should clean it
several times a year, following these steps:
1. Turn off the printer, unplug the power cord, and
disconnect the printer cable.
2. Remove the paper from all the paper feeders.
3. Clean the exterior of the printer with a soft, damp cloth.
Keep the printer cover closed so water doesn't get inside.
4. Clean ink out of the printer's interior with a soft, damp
cloth.

Transporting the Printer

If you want to ship your printer, you need to prepare it for
transportation and repack it in the original box. Follow these
steps:
1. Turn on the printer.
2. Remove all four of the ink cartridges and store them in
separate plastic bags.
3. Close the ink compartment door.
5-9
Maintenance and Transportation
button. The printer prints instructions on