Using The Micro Adjust Buttons - Epson Stylus Color 3000 User Manual

Printing on Special Media
Caution:
Never press Load/Eject
when you have
continuous label paper
loaded in the printer.
This would feed labels
backward, causing
them to peel off inside
the printer.
2. Lift the printer hood and tear off the printed pages at the
perforation by pulling it across the tear-off edge.
If the paper's perforation was not at the printer's tear-off
edge, adjust the tear-off position as described on page 3-22.
Do not perform step 3.
3. Press the
Load/Eject
continuous paper backward to the paper-park position so
it's ready for printing the next time you need it.
If the ink smears on your document, you can set the thickness
lever to the + position and reprint; see page 3-13.
If your margins are not where you want them, adjust them in
your application software. However, if you need to adjust your
paper's loading position, you can change it using the
buttons. See the next section for instructions.
Adjust

Using the Micro Adjust Buttons

The U and
Micro Adjust
printer's control panel allow you to make quick adjustments to
your paper's loading and tear-off positions.
3-20
button to feed the rest of the
D buttons on your
Micro Adjust
Micro