Necessary Supplies - ADTRAN Total Access 300 Series Installation And Maintenance Manual

■ RJ-45/RJ-11connector crimper
■ Four RJ-45 plugs depending on the application chosen
■ Two RJ-11 plugs (when not using Two-screw Terminal Bridges)
■ A telephony/data communication test set
■ PON power meter preferably with wave length filtering
■ Fiberscope or videoscope
■ Optical Time Domain Reflector meter calibrated for 1310 and 1490 nm output
■ Composite fiber cable for non-connectorized installation
■ ONT mounting hardware
■ Silicone sealant (and application material, i.e., cotton swabs)
■ Bonding clamp for grounding and securing the composite cable on non-connectorized
■ 1 each, 60" Hi-cap riser pipe (for composite cable installation)
■ Tie wraps
For fiber optic connections, the following are required:
■ Fiber Optical Fusion Splice Tools
■ ODC Fiber Connector Cleaning Tool
■ TexWipe
■ TexWipe
Included with the ONT packaging are 2 Two-screw Terminal Bridges, fiber cable management
and strain relief, a fiber connector, and electronics/optics. For data, the connection to the ONT
is through the RJ-45 Ethernet connectors. For POTS, the connection is made through 2 Two-
screw Terminal Bridges, or RJ-11 connections.

Necessary Supplies

Make sure you have access to the following supplies:
■ Appropriate surface anchors for mounting the ONT (each anchor rated to 15 lbs, or 6.8 kg
■ Assorted tie wraps for securing cabling and wiring
■ LC Optical Fiber connectors
612877AEONT-5B
installations
TM
Alco pad for fiber cleaning
TM
cloth for fiber cleaning
minimum)
Section 3, Single Family Unit Outdoor Installation - Installation
3-13