Changes in this manual
Changes with respect to the manual, edition 01/2016
• Dimension drawing for Power Modules FSD, FSE, FSF corrected.
• Degree of protection for output reactors corrected.
Assignment of converter FSD (18.5 kW and 22 kW) and output reactors corrected.
• Information on the minimum line impedance added.
• Incorrect information about line harmonics removed.
• Incorrect information about maximum conductor cross-section for Power Module FSE
corrected.
• Information on overcurrent protective devices added.
PM250 Power Module
Hardware Installation Manual, 04/2021, A5E36265179B-AB
Mounting the Power Modules (Page 26)
Output reactor (Page 72)
General technical data, PM250 (Page 57)
Electromagnetic compatibility of the inverter (Page 63)
Inverter terminals (Page 41)
Power-dependent data (Page 58)
1
5