Emergency And Panic Button; Activate The Panic Alarm - Cisco Webex 800 Series User Manual

Emergency and Panic Button

Step 3
To see how much snooze time remains, swipe down on the notification bar again.
Step 4 To Stop snoozing, swipe down on the notification bar and tap the Emergency notification again.
Emergency and Panic Button
Based on your organization requirements, your system administrator may configure the Emergency button
and Panic Button for use in case of emergency.
When you activate the Panic Button, the phone enters an alarm state. What happens in the alarm state depends
on how the system administrator configures the Emergency button and Panic Button. A loud warning tone
may sound and your phone may automatically call an emergency number.
Note If the phone calls an emergency number from the alarm state, any active call you may be on automatically
ends.

Activate the Panic Alarm

Your system administrator can configure the programmed red Emergency button on the top of your phone
and the Panic Button in the Emergency
• Long press
• Two short presses
• Either a long press or two short presses
Contact your system administrator to understand how to activate the panic alarm with your phone.
Note If you press the red Emergency button or Panic Button incorrectly, a pop-up tells you how to trigger a panic
alarm.
Your system administrator configures the actions that happen when you activate the Panic Button. For
example, the Panic Button may automatically:
• Place an emergency call.
• Activate the speakerphone.
• Place an emergency call using the speakerphone.
Procedure
Do one of the following:
• If programmed, press the red Emergency button on the top right of the phone, as directed.
Cisco Webex Wireless Phone 800 Series User Guide
64
app to activate in several different ways:
Emergency App