S
S
UPER
ERVER 6026TT-BT(R)F/BIBX(R)F/BIBQ(R)F User's Manual
Removing the Protective Film
Before operating the SC827 chassis for the fi rst time, it is important to remove the
protective fi lm covering the top of the chassis, in order to allow for proper ventila-
tion and cooling.
Removing the Protective Film
1.
Peel off the protective fi lm covering the top cover and the top of the chassis
2.
Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
Figure 2-1: Removing the Chassis Cover
1
1
Warning: Except for short periods of time, do NOT operate the server
without the cover in place. The chassis cover must be in place to al-
!
low proper airfl ow and prevent overheating.
Check Ventilation
Openings
2
1
2-4