SUPERSERVER 2026TT-DLRF/DLIBXRF/DLIBQRF User's Manual
Removing the Protective Film
Before operating the server for the fi rst time, it is important to remove the protec-
tive fi lm covering the top of the chassis, in order to allow for proper ventilation and
cooling.
Removing the Protective Film
1.
Peel off the protective fi lm covering the top cover and the top of the chassis
2.
Check that all ventilation openings on the top cover and the top of the chassis
are clear and unobstructed.
1
1
Warning: Except for short periods of time, do NOT operate the server
without the cover in place. The chassis cover must be in place to
!
allow proper airfl ow and prevent overheating.
Figure 2-1: Removing the Protective Film
Check Ventilation
Openings
2
1
2-4