Kobold Eb400 Automatic Electric Brush; Checking And Cleaning; Taking Out The Brush To Clean Or; Replace It - Vorwerk Kobold VT300 Instruction Manual

4 .3 Kobold eb400 automatIc
electrIc brush
WarnIng
risk of electric shock!
• Always switch the device off before all retrofit-
ting, cleaning and maintenance work and dis-
connect the mains plug from the socket.
cautIon
Pinching hazard!
• Stay clear of the moving parts on the Kobold
EB400 Automatic Electric Brush.
4 .3 .1

checKIng and cleanIng

1. Check the underside every once in a while to
prevent damage to the device and floor.
2. Perform visual inspections from time to time in
order to detect defects or very dirty areas.
3. A dirty sensor
not insert any sharp objects into the sensor
shaft.
4 .3 .2

taKIng out the brush to clean or

rePlace It

REMOVING THE ROLLER BRUSH
1. Place the Automatic Electric Brush upside down.
2. Unlock the floor plate
on both sides at the same time with your
hands.
3. Take off the floor plate
4. First lift the green side of the roller brush
of the Automatic Electric Brush and then pull the
black side off the axle.
can simply be vacuumed. Do
by pressing the locks
.
1
3
out
5
2
1
4