On Carpet Or Textile Flooring; Combination With Older Vacuum; Cleaner Models - Vorwerk Kobold VT300 Instruction Manual

If you put the Kobold VT300 Cylinder Vacuum
Cleaner in the standby position temporarily, the
rotating brush shuts off automatically.
3 .1 .6

on carPet or textIle floorIng

1. Never let the device work in one place for a
longer period, otherwise the carpet may be
damaged.
2. Keep moving the device back and forth during
operation.
3. To make sure that the Automatic Electric Brush
cleans the area in front and at the sides right up
to the edges,
4. vacuum with the side of the brush parallel to the
edge.
The rotating roller brush can also work
'mechanically' and comb the fringes of a rug
when used in hard floor mode. Only pull the
Kobold EB400 Automatic Electric Brush over the
fringes backwards, away from the carpet.
3 .1 .7

combInatIon WIth older Vacuum

cleaner models

If you use the Kobold EB400 Automatic
Electric Brush in combination with the Kobold
VT270 Cylinder Vacuum Cleaner or older models,
the manual switch between modes and the suction
regulation in the 'auto' setting are not available.